Announcement

Collapse
No announcement yet.

Correcting speedo (pinion angle)?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HaroldD
    replied
    On Ram Trucks, this is in the brake controller. I change it all of the time with a Snap On Modis via enhanced OBD - it prompts for either a preselected few tires for that model or will allow you to specify revs-per-mile.

    Leave a comment:


  • KRC Field Tech
    replied
    This is probably my most asked question with this unit. It would really be nice to get the tire size changing capability in the app.

    Leave a comment:


  • Ryan@SCT
    replied
    It may not be adjustable in the dodge vehicles at this point.

    I will edit the post above, since it that is how the ford applications work.


    Ryan
    Last edited by Ryan@SCT; 11-02-2007, 12:04 PM.

    Leave a comment:


  • KRC Field Tech
    replied
    I've not seen a tire size adjuster in any of the truck pcm's I've gone through.

    Leave a comment:


  • mrkindweiler
    replied
    would I be able to adjust my speedometer with the xcal2 for a '96 Gen II?

    Leave a comment:


  • DaPurpleRT
    replied
    not seeing axle...

    Leave a comment:


  • MikeT@SCT
    replied
    You can adjust your tire size by adjusting "Revs per Mile" in the "Axle" then select "Scalar." Hope this helps.

    Leave a comment:


  • DaPurpleRT
    started a topic Correcting speedo (pinion angle)?

    Correcting speedo (pinion angle)?

    How can I do this in Advantage? Only the rear tires size matters right? Factory is 255/55/17, now it's 295/45/20.

    TIA.
Working...
X